KD20 Clinic Module With Cover and Sink

 

GENERAL INFORMATION           

With its modular structure, it provides functionality and esthetics to your workplace.It unites the characteristics of the place with ergonomics and thus ensures a comfortable workspace and contributes to the enhancement of the performance of the users.

Project and manufacturing in various sizes and characteristics of various models is available for customer requirements.

Modular tables can be made of any of the laminate, stainless steel, glass or acrylic materials.

The heights of the shelves within the cabinet can be adjusted.

 

TECHNICAL FEATURES  

  • 1 mm thick sheet is used for all parts of the cabinet.
  • Dolap ebadı:500x500x850mm H-In the lower section, cabinet is placed on 100mm high plinth.-There are knuckle feet under the plinth which balance the cabinet.
  • There is a shelf with adjustable height inside the cabinet.
  • On the cabinet there is a laminated table over 18mm thick rasping sheet.
  • The rear edge of the table is heightened 50mm.
  • Table application can be manufactured with glass, compact or acrylic materials to the needs.
  • Upon request, sink made of cr-ni, ceramic, glass or acrylic materials can be applied on the table.
  • With the sink, optional faucet can be installed.
  • Cabinet cover has two walls and can be opened and closed with control with 2 suspension hinges.
  • There is an embedded handle on the cover.
  • All of the metal sections are painted with electrostatic powdered paint and ovendried in 200 °C.