A20 Tool Trolley

A20 Tool Trolley Technical Features

  • Frame of the stand is made of 25x25x1.2mm box profile.
  • Shelves of the stand are made of 1.2mm thick DKP sheet.
  • There is a push arm with 25 mm diameter on the rear section of the stand.
  • There are protective bars on the rear and sides of the upper shelf to prevent the material from falling.
  • The front and sides of the upper shelf are heightened with special twisting to prevent liquids from spilling.
  • There are protective bars on fron, rear and side sections of the middle and lower shelves.
  • 4 units of plastic wheels with 50 mm diameter, 2 of which are with breaks, are used on the feet of the stand.
  • All parts of the stand are painted with electrostatic powdered paint and ovendried in 200 °C.
  • The profile frame of the stand can be optionally manufactured with chromium plating.