T70 Plasma Display Trolley 32″

T70 Plasma Display Trolley 32″ Technical Features

  • The frame of the trolley is manufactured by bolting together aluminium sigma profiles.
  • 45x45mm sigma profile is used in the foot section.
  • Side poles are manufactured by combining 45 mm radius sigma profiles.
  • Base section is made of 1.5mm thick DKP sheet and twisted in a manner to place brochures, magazines etc. on it.
  • Between the tow side poles in the middle there are 2 boxes made of 4mm thick transparent Plexiglas for placing magazine, brochure, catalogue etc.
  • There is a light panel enlightened with led lights on the front side of the upper section; and on the rear section there are the plug group section consisting of 3 grounding plugs and the switch button.
  • There is the monitor bearing equipment above the light panel.
  • Monitor holding equipment is positioned in the centre and it is manufactured in a way to allow turning, tilting and locking if required. Connection vesa 75/100/150/200
  • Aluminium sigma profiles are unpainted but anodize coated.  All other sheet equipments are painted with electrostatic powdered paint and ovendried in 200 °C.
  • There are 4 rotating wheels in the trolley, two of which have break mechanisms.